2 thoughts on “Gilt, gold, gold, gold, and gold -plated technology, the trouble is briefly explained. Don't copy and paste!”
Erick
Gold This is an ancient traditional craft. Archaeological confirmed that this craft has begun in the middle of the Warring States Period. The golden technology mainly synthesizes gold and mercury (mercury) into gold mercury paint, and then gold mercury paint is applied to the utensil according to the pattern or requesting it, and then baked to evaporate the mercury, so that the gold is firmly attached to the surface of the utensil. It can be applied to goldcast paint several times as needed to increase the effect of gilt gold. The gold on the utensils is firm and it is not easy to fall off.
The gold plating The real electroplating gold plating process has not developed very long, only more than 100 years of history. However, its technology is very mature. At present, most artworks, jewelry, noble decoration and precision workpieces are used in gold plating. The gold -plated layer has the effect of corrosion, abrasion resistance, and high temperature, and the golden brown luster is extremely beautiful. The gold -plated method includes cyanide gold plating, low cyanide gold -plating method, and cyanide gold -plating method. Gold plating is divided into two categories, one is plated at homogeneous materials, and the other is heterogeneous material gold plating. Homogeneous material gold plating refers to gold plating on the surface of gold jewelry. Its significance is to improve the brightness and color of jewelry. Heterogeneous material gold plating refers to gold -plating treatment of non -golden materials, such as silver -plated and copper gold plating. Its meaning is to replace the color of the material with the gloss of gold, thereby improving the ornamental effect of jewelry. The quality of gold plating quality is how much the thickness of the gold -plated layer, and the luster is darker. At present, the standard gold plating jewelry standard is: good gold -plated jewelry plating thickness is 10 microns -25 microns, and general gold -plated jewelry plating is located in 2 microns -3 microns. "Gold" is called "Tu Jin", which is a cheap jewelry technology. The gold plating according to its process characteristics, there are two types of cyanide gold plating and cyanide gold plating. At present, the quality of gold plating is that it is plated with cyanide (potassium cyanide). Its color, adhesion, and abrasion resistance are better than that of cyanide gold. In recent years, with the advancement of electroplating technology, the gold -plated technology has made new breakthroughs. In the past, gold -plated jewelry had only one gold color. Now France, the United States, and Japan have three colors and even more colors. Color gold plating, known as three -color gold, has rose, silver, gold, black, blue and other types. Generally speaking, the plating of homogeneous gold plating does not need to be too thick, it only needs to reach 2 microns. Heterogeneous gold -plated coating should be thicker. Some countries stipulate that the gold -plated layers of such products must reach more than 10 microns, and some companies internationally have higher requirements for gold -plated coating, reaching 12.5 microns to qualify.
This gold The gold foil requires gold foil as raw materials. Gold foil can be pasted to a smooth surface, or it can be processed into exquisite patterns. The carved beams and statues of many palace temples are often used to make gold, which makes the building extremely brilliant. Paste gold is a traditional and special craft. When the modern gold -packed gold process has not been born, the gold is the same meaning that the gold is the same as the gold. Due to the modern gold -packing process, the golden technology has become a unique craft. The traditional golden craftsmanship is to first make a high -quality gold and create a very thin gold foil. At this time, the gold foil has a strong attachment and has a good mutual suction for some smooth materials. In the past, in addition to some crafts, a large amount of money was used for Buddha statues, signboards, buildings, etc. Paste gold has high application value for some products that cannot be processed with gold -plated and gold -packed technology. In foreign countries, many large decorations and some non -metallic items are processed with gold processing processes.
1. Gilt (工) gold process: a method of using gold decorative utensils. Apply the gold that dissolved in the mercury with a brush on the surface of the utensil. After drying, bake it with charcoal fire, and then use agate to roll it. All the processes generally need to be repeated three times. 2 Gold plating process: Use electrolytic or other chemical methods to attach gold to the surface of the metal or other objects to form a thin gold. 3. Gold process: stick gold foil on the utensil. 4. Gold in gold: Gold or silver into thin slices, cover it on the carcass, and then tap it with hammer to make the bump texture like the surface of the carcass.
Gold
This is an ancient traditional craft. Archaeological confirmed that this craft has begun in the middle of the Warring States Period. The golden technology mainly synthesizes gold and mercury (mercury) into gold mercury paint, and then gold mercury paint is applied to the utensil according to the pattern or requesting it, and then baked to evaporate the mercury, so that the gold is firmly attached to the surface of the utensil. It can be applied to goldcast paint several times as needed to increase the effect of gilt gold. The gold on the utensils is firm and it is not easy to fall off.
The gold plating
The real electroplating gold plating process has not developed very long, only more than 100 years of history. However, its technology is very mature. At present, most artworks, jewelry, noble decoration and precision workpieces are used in gold plating. The gold -plated layer has the effect of corrosion, abrasion resistance, and high temperature, and the golden brown luster is extremely beautiful. The gold -plated method includes cyanide gold plating, low cyanide gold -plating method, and cyanide gold -plating method. Gold plating is divided into two categories, one is plated at homogeneous materials, and the other is heterogeneous material gold plating. Homogeneous material gold plating refers to gold plating on the surface of gold jewelry. Its significance is to improve the brightness and color of jewelry. Heterogeneous material gold plating refers to gold -plating treatment of non -golden materials, such as silver -plated and copper gold plating. Its meaning is to replace the color of the material with the gloss of gold, thereby improving the ornamental effect of jewelry.
The quality of gold plating quality is how much the thickness of the gold -plated layer, and the luster is darker. At present, the standard gold plating jewelry standard is: good gold -plated jewelry plating thickness is 10 microns -25 microns, and general gold -plated jewelry plating is located in 2 microns -3 microns. "Gold" is called "Tu Jin", which is a cheap jewelry technology.
The gold plating according to its process characteristics, there are two types of cyanide gold plating and cyanide gold plating. At present, the quality of gold plating is that it is plated with cyanide (potassium cyanide). Its color, adhesion, and abrasion resistance are better than that of cyanide gold. In recent years, with the advancement of electroplating technology, the gold -plated technology has made new breakthroughs. In the past, gold -plated jewelry had only one gold color. Now France, the United States, and Japan have three colors and even more colors. Color gold plating, known as three -color gold, has rose, silver, gold, black, blue and other types. Generally speaking, the plating of homogeneous gold plating does not need to be too thick, it only needs to reach 2 microns. Heterogeneous gold -plated coating should be thicker. Some countries stipulate that the gold -plated layers of such products must reach more than 10 microns, and some companies internationally have higher requirements for gold -plated coating, reaching 12.5 microns to qualify.
This gold
The gold foil requires gold foil as raw materials. Gold foil can be pasted to a smooth surface, or it can be processed into exquisite patterns. The carved beams and statues of many palace temples are often used to make gold, which makes the building extremely brilliant. Paste gold is a traditional and special craft. When the modern gold -packed gold process has not been born, the gold is the same meaning that the gold is the same as the gold. Due to the modern gold -packing process, the golden technology has become a unique craft. The traditional golden craftsmanship is to first make a high -quality gold and create a very thin gold foil. At this time, the gold foil has a strong attachment and has a good mutual suction for some smooth materials. In the past, in addition to some crafts, a large amount of money was used for Buddha statues, signboards, buildings, etc. Paste gold has high application value for some products that cannot be processed with gold -plated and gold -packed technology. In foreign countries, many large decorations and some non -metallic items are processed with gold processing processes.
1. Gilt (工) gold process: a method of using gold decorative utensils. Apply the gold that dissolved in the mercury with a brush on the surface of the utensil. After drying, bake it with charcoal fire, and then use agate to roll it. All the processes generally need to be repeated three times.
2 Gold plating process: Use electrolytic or other chemical methods to attach gold to the surface of the metal or other objects to form a thin gold.
3. Gold process: stick gold foil on the utensil.
4. Gold in gold: Gold or silver into thin slices, cover it on the carcass, and then tap it with hammer to make the bump texture like the surface of the carcass.